SeaLand 3100 Betriebsanleitung PDF herunterladen (Seite 10)

10

38. Reassemble the inlet valve

assembly in the reverse or-

der of step #7. Make certain

all the components are press

fit together and that the

spring retainer (#54) is

slightly counter sunk in the

valve housing (#52). Grease

the o-ring (#53) and install it

on to the valve housing. Re-

install the entire inlet valve

assembly into the manifold

(#43). install the tension

plugs (#42A) and tighten.

39. Again lubricate the plungers

(29B) and slide the manifold

(#43) gently and evenly over

the plungers. Press the

manifold firmly into place

against the crankcase (#1).

Install the spring washer

(#50A) and tighten the

manifold stud nuts (#50) to

58 ft.lbs.

37. Place the entire discharge as-

sembly into discharge port

making certain the assembly

is properly seated. Install

discharge plug (#48) and

hand tighten.

Position Item# Description Torque Amount (in.-lbs.)

17 08095 Hex Screw, Bearing Cover 125

24A 07122 Hex Screw, Connecting Rod 250

29C 07257-0100 Bolt, Plunger 300

50 07158 Nut, Manifold Stud 700

MP4130-3100 TORQUE SPECIFICATIONS

Pump Mounting Selection Guide

Bushings

01074 24 mm Tapered H Bushing

Pulley & Sheaves

01061 7.75” Cast Iron 1 gr. - AB Section

01062 7.75” Cast Iron - 2 gr. - AB Section

Rails

01160 Plated Steel Channel Rails

(L=5.75”x W=1.00”x h=2.50”)

01161 Plated Steel Channel Rails

(L=5.75”x W=1.00”x H=2.50”)

1 2 ... 5 6 7 8 9 10 11 12

Kommentare zu diesen Handbüchern

Keine Kommentare