Sealand VacuStat Status Panel Bedienungsanleitung PDF herunterladen (Seite 1)

Part Number Description

313700012 VacuStat - 12 VDC

313700024 VacuStat - 24 VDC

313700112 VacuStat Magnum Opus - 12 VDC

313700124 VacuStat Magnum Opus - 24 VDC

Specifications

Average Current Consumption for 12 or 24 VDC Models:

0.016 Amps

Panel Material:

Brushed Platinum Polyester

Features

• A desirable accessory for VacuFlush

systems.

• Continuously monitors status of vacuum for proper operation.

• Green light indicates that it is ready to flush.

• Red light indicates that the vacuum pump is running or, if connected to a TankWatch

4 level indicator with shut-

down relay, denotes that the holding tank is full.

• Brushed metallic-look panel complements bathroom décor.

Installation Instructions

1. Choose an appropriate location for the VacuStat panel.

2. Using the mounting hole location diagram, drill (2) 1-inch holes as noted.

3. If necessary, drill two 1/16” pilot holes for the two #4 x 3/8” mounting screws provided. The locations for these holes

are also noted on the hole location diagram.

4. Route wiring according to the wiring diagram. Use approved connectors for attaching all wires. If only one input for

the “Do Not Flush” light is needed, either tie both the red and blue wires together or isolate one wire with an approved

wire nut or equivalent.

5. Once the wiring is completed, mount the panel with the two mounting screws.

NOTE: In order for the red LED to function properly for both Low Vacuum and Tank Full status, the negative signal from

the Tank Full float switch must be converted to a positive signal. This can be accomplished by using a TankWatch 4 with

a relay or by using a shut-down relay assembly.

Wiring Diagram

Installation Instructions

VacuStat



Status Panel

Dometic Corporation • Sanitation Systems

13128 State Rt. 226, P.O. Box 38

Big Prairie, OH 44611-0038 USA

330-496-3211

1-800-321-9886 • Fax: 330-496-3097

® Registered; ™ Trademark of Dometic Corporation

1 2

Inhaltsverzeichnis

Seite 1 - Status Panel

Part Number Description313700012 VacuStat - 12 VDC313700024 VacuStat - 24 VDC313700112 VacuStat Magnum Opus - 12 VDC313700124 VacuStat Magnum Opus - 2

Seite 2 - 343679 6/02

Wiring Diagram Including TankWatch 4 w/Optional RelayMounting Hole Location Template® Registered; ™ Trademark of Dometic Corporation 2002 Dometic Cor

Kommentare zu diesen Handbüchern

Keine Kommentare

Sealand VacuStat Status Panel Bedienungsanleitung Seite 1

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Hardware Sealand VacuStat Status Panel herunter. SeaLand VacuStat Status Panel User Manual Benutzerhandbuch

Inhaltsverzeichnis

Kommentare zu diesen Handbüchern

Sealand VacuStat Status Panel Bedienungsanleitung Seite 1

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Hardware Sealand VacuStat Status Panel herunter. SeaLand VacuStat Status Panel User Manual Benutzerhandbuch

Inhaltsverzeichnis

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Hardware Sealand VacuStat Status Panel